Wilwood 120-16510 D11 Universal Lug Mount Caliper 4 Pistons
Wilwood Out of stock
Wilwood 120-16510 D11 Universal Lug Mount Caliper 4 Pistons
D11 Caliper
Wilwood's D11 four piston calipers are a direct bolt-on replacement for the original equipment Kelsey-Hayes calipers on all 1965-67 Ford Mustang, Fairlane, Ranchero, Falcon, Comet, and Mercury Cougar.
Forged billet aluminum bodies, internal fluid crossover, stainless steel pistons, and high-temperature seals put an end to the rust, leaking, bore pitting and seal failures that plague the OE caliper design. D11 calipers can use factory-style brake pads, and fit in stock location with original brackets and rotors.
D11 calipers mount in the stock location over stock rotors and use the original type D11 brake pads. These calipers fit inside most production steel wheels and most of the later model alloy wheels. D11 calipers use the same overall piston volumes as the original calipers. Other than a new flexline with an 1/8”-27 NPT end for the new aluminum caliper, no other changes such as master cylinder output or front to rear bias adjustment are necessary.
Wilwood's D11 four piston calipers are a direct bolt-on replacement for the original equipment Kelsey-Hayes calipers on all 1965-67 Ford Mustang, Fairlane, Ranchero, Falcon, Comet, and Mercury Cougar.
Forged billet aluminum bodies, internal fluid crossover, stainless steel pistons, and high-temperature seals put an end to the rust, leaking, bore pitting and seal failures that plague the OE caliper design. D11 calipers can use factory-style brake pads, and fit in stock location with original brackets and rotors.
| Pistons | |
|---|---|
| Piston Count | 4 |
| Piston Area (in²) | 4.12 |
| Piston Type | Stainless |
| Dust Boot | No |
| Rotor Dimensions | |
| Rotor Width (in) | 0.94 |
| Rotor Diameter(in) | 11.30 |
| Pad Dimensions | |
| Pad Area (in²) | 8.27 |
| Pad Volume (in³) | 5.8 |
| Duty Rating & Material | |
| Material | Forged Aluminium |
| Weight(Lbs) | 6.3 |
| Colors & Finish | |
| Color | Anodize |
| Finish | Type III Anodize |
| Mounting | |
|---|---|
| Mount Center(in) | 7.00 |
| Mount Position | |
| Mount Side | Universal |
| Mount Type | Lug |
| Rotor Compatibility | |
|---|---|
| Rotor Width (in) | 0.94 |
| Maximum Rotor Width (in) | 0.94 |
| Minimum Rotor Width (in) | 0.81 |
| Maximum Rotor Diameter(in) | 11.30 |
| Minimum Rotor Diameter(in) | 11.30 |
| Piston Specifications | |
|---|---|
| Piston 1 Bore (in) | 1.62 |
| Piston 2 Bore (in) | 1.62 |
| Piston 3 Bore (in) | |
| Total Piston Area (in²) | 4.12 |
More Information
| Manufacturer | Wilwood |
|---|