Wilwood 120-14851 AT6 Lug Mount Caliper Left 6 Pistons Black
Wilwood 120-14851 AT6 Lug Mount Caliper Left 6 Pistons Black
Wilwood
On demand
Wilwood 120-14851 AT6 Lug Mount Caliper Left 6 Pistons Black
AT6 Lug Mount
Wilwood’s AT6 forged aluminum racing caliper is designed, engineered, and purpose built to endure the rigors of off-road truck and buggy racing. The AT6 combines the latest technologies in manufacturing materials and processes in the most popular mounting configuration built “tough enough for Baja.” The caliper covers a wide range of racing classes in SCORE, BITD, Ultra-4, Pre-Runner, and all similar sanctions of desert and off-road competition, and is well suited for both short course and endurance length events. AT6 calipers feature high-strength, lightweight forged aluminum lug mount body with the popular 6.88” mount centers. MIL-Spec Type III hard anodizing is applied to all surfaces on all models for long wear and abrasion resistance. A massive bolt-in center bridge support adds stiffness and top-side pad access. Thermlock pistons are also available as an upgrade.
Six-piston, progressive differential bore configuration provides even pad wear through balanced loading. Stainless steel pistons reduce heat transfer and resist all corrosion. Internal seal-in-bore design provides controlled retraction without the issues common to external boots. Internal damper springs reduce deflection induced pad knock-back. Replaceable stainless steel, spring loaded bridge abutment plates. Uses large volume type 7516 pads. Also available with gloss red or black
Pistons
Piston Count
6
Piston Area (in²)
5.40
Piston Type
Stainless
Dust Boot
No
Rotor Dimensions
Rotor Width (in)
0.72
Rotor Diameter(in)
12.30
Pad Dimensions
Pad Area (in²)
11.31
Pad Volume (in³)
5
Duty Rating & Material
Material
Forged Aluminium
Weight(Lbs)
6.2
Colors & Finish
Color
Black
Finish
Black Powder Coat
Mounting
Mount Center(in)
6.88
Mount Position
Mount Side
Left Hand
Mount Type
Lug
Specifications
Rotor Compatibility
Rotor Width (in)
0.72
Maximum Rotor Width (in)
0.72
Minimum Rotor Width (in)
0.66
Maximum Rotor Diameter(in)
12.30
Minimum Rotor Diameter(in)
12.30
Brake Pad Specifications
Brake Pad Type 1
7516
Brake Pad Type 2
N-A
Brake Pad Type 3
N-A
Total Pad Area (in²)
11.31
Total Pad Volume (in³)
5
Mount
Piston Specifications
Piston 1 Bore (in)
1.75
Piston 2 Bore (in)
1.38
Piston 3 Bore (in)
1.38
Total Piston Area (in²)
5.40
Mounting Specifications
Mount Type
Lug
Mount Side
Left Hand
Mount Center(in)
6.88
Mount Hole Size(in)
0.39
Mount Height(in)
2.62
Inlet Thread Size
1/8-27 NPT
AT6 Lug Mount
Wilwood’s AT6 forged aluminum racing caliper is designed, engineered, and purpose built to endure the rigors of off-road truck and buggy racing. The AT6 combines the latest technologies in manufacturing materials and processes in the most popular mounting configuration built “tough enough for Baja.” The caliper covers a wide range of racing classes in SCORE, BITD, Ultra-4, Pre-Runner, and all similar sanctions of desert and off-road competition, and is well suited for both short course and endurance length events. AT6 calipers feature high-strength, lightweight forged aluminum lug mount body with the popular 6.88” mount centers. MIL-Spec Type III hard anodizing is applied to all surfaces on all models for long wear and abrasion resistance. A massive bolt-in center bridge support adds stiffness and top-side pad access. Thermlock pistons are also available as an upgrade.
Six-piston, progressive differential bore configuration provides even pad wear through balanced loading. Stainless steel pistons reduce heat transfer and resist all corrosion. Internal seal-in-bore design provides controlled retraction without the issues common to external boots. Internal damper springs reduce deflection induced pad knock-back. Replaceable stainless steel, spring loaded bridge abutment plates. Uses large volume type 7516 pads. Also available with gloss red or black
Pistons
| Piston Count | 6 |
| Piston Area (in²) | 5.40 |
| Piston Type | Stainless |
| Dust Boot | No |
Rotor Dimensions
| Rotor Width (in) | 0.72 |
| Rotor Diameter(in) | 12.30 |
Pad Dimensions
| Pad Area (in²) | 11.31 |
| Pad Volume (in³) | 5 |
Duty Rating & Material
| Material | Forged Aluminium |
| Weight(Lbs) | 6.2 |
Colors & Finish
| Color | Black |
| Finish | Black Powder Coat |
Mounting
| Mount Center(in) | 6.88 |
| Mount Position | |
| Mount Side | Left Hand |
| Mount Type | Lug |
Specifications
Rotor Compatibility
| Rotor Width (in) | 0.72 |
| Maximum Rotor Width (in) | 0.72 |
| Minimum Rotor Width (in) | 0.66 |
| Maximum Rotor Diameter(in) | 12.30 |
| Minimum Rotor Diameter(in) | 12.30 |
Brake Pad Specifications
| Brake Pad Type 1 | 7516 |
| Brake Pad Type 2 | N-A |
| Brake Pad Type 3 | N-A |
| Total Pad Area (in²) | 11.31 |
| Total Pad Volume (in³) | 5 |
| Mount |
Piston Specifications
| Piston 1 Bore (in) | 1.75 |
| Piston 2 Bore (in) | 1.38 |
| Piston 3 Bore (in) | 1.38 |
| Total Piston Area (in²) | 5.40 |
Mounting Specifications
| Mount Type | Lug |
| Mount Side | Left Hand |
| Mount Center(in) | 6.88 |
| Mount Hole Size(in) | 0.39 |
| Mount Height(in) | 2.62 |
| Inlet Thread Size | 1/8-27 NPT |
More Information
Manufacturer
Wilwood
Series
AT6 Lug Mount
| Manufacturer |
Wilwood
|
|---|---|
| Series | AT6 Lug Mount |