CANchecked TPS04 Tire Pressure Temperature Monitoring System TPMS with Receiver
CANchecked TPS04 Tire Pressure Temperature Monitoring System TPMS with Receiver
CANchecked TPS04 – Tire Pressure and Tire Temperature Monitoring via CAN Bus
Does your vehicle lack a factory-installed TPMS system, but you still want to monitor tire pressure and tire temperature? The CANchecked TPS04 is the ideal solution for retrofitting a tire pressure and temperature monitoring system with direct CAN bus integration.
The kit consists of four black anodized TPMS valve sensors and a receiver. The sensors measure tire pressure and tire temperature and wirelessly transmit the readings to the receiver, which makes the data available on the CAN bus.
The receiver features a 50 cm AWG22 cable with a DTM04-4P connector. The matching DTM06-4S mating connector and five DTM pins are included in the package. The wiring follows the standardized CANchecked pinout.
The system supports up to 12 tires across three different wheel sets. The kit is supplied with four pre-paired sensors as standard. The separately available TPT01 programming tool (CC22982) is required to pair additional sensors. Individual replacement sensors are available under article number CC22981.
A DBC file and a TRI file are available for download on our website. CAN communication can be configured to facilitate integration into different CAN bus environments.
Technical Specifications – Sensors
- Temperature range: -40 to 125 °C
- Temperature resolution: 1 °C
- Pressure range: 0–800 kPa (0–116 psi)
- Radio frequency: 433.92 MHz
- Battery: CR2050, 380 mAh (manufacturer specification)
- IP rating: IP67
Technical Specifications – Receiver
- Operating temperature: -40 to 125 °C
- Supported sensors: 1 to 12 tires
- Supply voltage: 12–32 V
- Supply current: Less than 40 mA
- Dimensions: 124.7 × 47.2 × 32.8 mm (97.9 mm without brackets)
- Weight: 114 g
- Material: Nylon 12
- IP rating: IP51
CAN Communication
- CAN standard: CAN 2.0A (11-bit identifier) or CAN 2.0B
- CAN bit rate: 250 kbit/s, 500 kbit/s (default), or 1 Mbit/s
- Byte order: Big Endian (MSB first)
- CAN termination: None integrated
- Default transmit CAN ID: 0x710 (adjustable)
- Programmable parameters: CAN speed and CAN ID
Wiring and Connections
- Cable: 0.5 m, AWG22
- Connector: DTM04-4P
- Mating connector: DTM06-4S included
Scope of Delivery
- 1 × CANchecked TPS04 receiver
- 4 × black anodized TPMS valve sensors
- 1 × DTM06-4S mating connector
- 5 × DTM pins
Note: The TPT01 programming tool (CC22982) is not included. It is only required when pairing additional sensors beyond the standard set of four.
CANchecked TPS04 – Tire Pressure and Tire Temperature Monitoring via CAN Bus
Does your vehicle lack a factory-installed TPMS system, but you still want to monitor tire pressure and tire temperature? The CANchecked TPS04 is the ideal solution for retrofitting a tire pressure and temperature monitoring system with direct CAN bus integration.
The kit consists of four black anodized TPMS valve sensors and a receiver. The sensors measure tire pressure and tire temperature and wirelessly transmit the readings to the receiver, which makes the data available on the CAN bus.
The receiver features a 50 cm AWG22 cable with a DTM04-4P connector. The matching DTM06-4S mating connector and five DTM pins are included in the package. The wiring follows the standardized CANchecked pinout.
The system supports up to 12 tires across three different wheel sets. The kit is supplied with four pre-paired sensors as standard. The separately available TPT01 programming tool (CC22982) is required to pair additional sensors. Individual replacement sensors are available under article number CC22981.
A DBC file and a TRI file are available for download on our website. CAN communication can be configured to facilitate integration into different CAN bus environments.
Technical Specifications – Sensors
- Temperature range: -40 to 125 °C
- Temperature resolution: 1 °C
- Pressure range: 0–800 kPa (0–116 psi)
- Radio frequency: 433.92 MHz
- Battery: CR2050, 380 mAh (manufacturer specification)
- IP rating: IP67
Technical Specifications – Receiver
- Operating temperature: -40 to 125 °C
- Supported sensors: 1 to 12 tires
- Supply voltage: 12–32 V
- Supply current: Less than 40 mA
- Dimensions: 124.7 × 47.2 × 32.8 mm (97.9 mm without brackets)
- Weight: 114 g
- Material: Nylon 12
- IP rating: IP51
CAN Communication
- CAN standard: CAN 2.0A (11-bit identifier) or CAN 2.0B
- CAN bit rate: 250 kbit/s, 500 kbit/s (default), or 1 Mbit/s
- Byte order: Big Endian (MSB first)
- CAN termination: None integrated
- Default transmit CAN ID: 0x710 (adjustable)
- Programmable parameters: CAN speed and CAN ID
Wiring and Connections
- Cable: 0.5 m, AWG22
- Connector: DTM04-4P
- Mating connector: DTM06-4S included
Scope of Delivery
- 1 × CANchecked TPS04 receiver
- 4 × black anodized TPMS valve sensors
- 1 × DTM06-4S mating connector
- 5 × DTM pins
Note: The TPT01 programming tool (CC22982) is not included. It is only required when pairing additional sensors beyond the standard set of four.