Wilwood 120-16101 GM-Metric-Iron Universal Floating Mount Caliper 1 Pistons

Manufacturer RTMG PerformanceRTMG Performance
SKU WIL-120-16101

  On demand

 

Wilwood 120-16101 GM-Metric-Iron Universal Floating Mount Caliper 1 Pistons

GM-Metric-Iron Single Piston Floater

These are all new and not rebuilt, cast iron calipers, purpose built for racing. Wilwood’s GM Metric Calipers are bolt-on replacements for 1978 and later GM Metric calipers widely used in "spec" racing categories. Wilwood’s new 2.50” piston GM Metric calipers are now officially approved for IMCA as OEM replacement caliper that meet all rules in Modified, Stock Cars, Hobby Stocks, Northern and Sothern Sport Mods. The GM Metric caliper is also available in 2.75” and 2.00” piston sizes for use in other non-restricted series or applications. Calipers require use of hardened Wilwood slide pins (sold separately), request part no. 230-0619 (slide pin kit) that contains 4 slide pins, enough for two calipers.

Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are three piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately, re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability, and performance.

To address these needs, Wilwood has tooled three separate castings that are fitted with 2.75", 2.50” or 2.00" stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when used in hard braking applications and maintain their resilience to provide positive piston retraction on release.

Pistons
Piston Count 1
Piston Area (in²) 4.90
Piston Type Stainless
Dust Boot No
Rotor Dimensions
Rotor Width (in) 1.04
Rotor Diameter(in) 11.75
Pad Dimensions
Pad Area (in²) 8.7
Pad Volume (in³) 2.9
Duty Rating & Material
Material Cast Iron
Weight(Lbs) 4.3
Colors & Finish
Color Bare
Finish Bare

Mounting
Mount Center(in) 5.46
Mount Position  
Mount Side Universal
Mount Type Floating

 

Rotor Compatibility
Rotor Width (in) 1.04
Maximum Rotor Width (in) 1.04
Minimum Rotor Width (in) 0.81
Maximum Rotor Diameter(in) 11.75
Minimum Rotor Diameter(in) 11.00


Piston Specifications
Piston 1 Bore (in) 2.50
Piston 2 Bore (in)  
Piston 3 Bore (in)  
Total Piston Area (in²) 4.90

More Information

Manufacturer RTMG PerformanceRTMG Performance
Write Your Own Review
You're reviewing: Wilwood 120-16101 GM-Metric-Iron Universal Floating Mount Caliper 1 Pistons
Your Rating:
Loading...

You submitted your review for moderation.