Remote Mount SVF Swing Valve Filler 1.5IN Elbow Radium Engineering

A remote mounted fuel filler is NOT located directly on the fuel tank or fuel cell, but rather somewhere else on the vehicle, such as the fender.

It is made up of 3 main components:
1. Remote filler. This is the filler housing and cap that attaches to the exterior of the vehicle.
2. Remote fill neck. This is the barbed or AN connection that attaches to the FCST or fuel cell.
3. Filler hose. This is the black or clear hose attaching #1 and #2 on this list.

20-1103 REMOTE MOUNT, SWING VALVE FILLER, 1.5IN ELBOW

Designed for remote mounting to an external surface such as a fender. The fuel cap swings open like an OEM "capless" fuel filler. Nothing has to be unscrewed. The swing valve seals using an FKM O-ring. Furthermore, a press-fit dust cap tethers from the flange mount for quick access. The 30mm opening is large enough for both gasoline and diesel fill nozzles.

Requires a 77mm (3.03") hole to be fabricated. Includes a swing valve fill cap as well as a gasket, stainless steel hardware, an aluminum housing and aluminum nut ring. Also, an aluminum 75 degree 24AN hose end and a 1-7/8" wrench. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).

SPECIFICATIONS

• Filler Hose Requirement: 1.5"
• Flange Outer Diameter: 4.75"
• Bolt Circle Diameter: 4.25" PCD
• Hose End Connection: 24AN
• Hose End Angle: 75 degree