Aluminum elbows
Aluminum elbows - available at FMIC made from 30cm and 60cm aluminum tubes
In our offer you will find aluminum elbows made of aluminum with a raked end in many different diameters from 16 mm to 102 mm, bent from 30cm and 60cm tubes
Aluminum elbows are, of course, not the only element needed at the stage of tuning the intake system, so in our assortment you will also find such articles as :
- aluminum connectors from lengths - 6, 10 and 16 cm
- aluminum pipes
- aluminum reductions
- silicone connectors
- clamps
- T-pieces
The available assortment makes the construction of car intake systems much simpler and faster.
Aluminum elbows with angles of 45st, 90st, 75st, 135st, 180st - available at FMIC
Aluminum elbow is excellent for building, for example, intake and cooling system. With a wall thickness of 2mm, the elbow is very lightweight, as well as very resistant to intake pressures, and can be welded without any problems. In addition to reducing the weight of the intake, it also greatly improves the aesthetic appearance - it is finished in high gloss.
Available bending angles: 45st, 90st, 75st, 135st, 180st
Outside diameter: 16mm -102mm
Wall thickness: 2mm
Bent from a straight section of 30cm or 60cm
Arm length: 15cc or 30cm
L-shaped aluminum elbows
The 90-degree "L" shaped aluminum elbow with a diameter of 16mm, bent so that one arm is 20cm, the other 40cm, is excellent for building intake and cooling system. The 2mm thick wall makes the elbow very light, and also very resistant to the pressures in the intake, it can be welded without any problems. In addition to reducing the weight of the intake, it also greatly improves the aesthetic appearance - it is finished in high gloss.
Type: 90' in the shape of the letter "L"
Outside diameter: 16mm - 102mm
Wall thickness: 2mm
Bent from a straight section of 60cm
Arm lengths: 20cm and 40cm
S-shaped aluminum elbows - a product of assistance in the construction of the intake
S-shaped aluminum pipe with a diameter of 19mm and a length of 60cm, finished with humps, is excellent for building an intake and cooling system. With a wall thickness of 2mm, the pipe is very light, and also very resistant to the pressures in the intake, and can be welded without any problems. In addition to reducing the weight of the intake, it also greatly improves the aesthetic appearance - it is finished in high gloss.
Length: 60cm
Outside diameter: 16mm - 102mm
Wall thickness: 2mm
The large stock of goods in our store makes the execution of orders and shipments of products are carried out rapidly. We invite you to check our offer and purchase elbows in case of doubts, our customer service offers information and assistance in tailoring a solution tailored to customer expectations. You can contact us by phone, e-mail or chat on the site.