DynoSW PU-600 Measurement Panel
Measurement Panel PU-600
The PU-600 test panel is used for the installation of measuring systems in more extensive measuring, research and teaching stations. Due to its dimensions it is suitable for the installation of additional measurement systems.
| Technical specifications | |
| Material | steel plate |
| Width | 60 mm |
| Height | 1000 mm |
| Depth | 400 mm |
| Colour | RAL 7035 |
| Protection class | IP 55 |
BRAKE CONTROLLER Version I - Parameters
| Dynamometer controller parameters 1 |
| Base computer 4-core Cortex A76 2.4 GHz; 4GB RAM LPDDR4; Data storage 64 GB 100MB/s; Microcontroller 32-bit RISC 64MHz |
| Input/Output layout |
| - Wi-Fi IEEE 802.11b/g/n/ac (2.4/5 GHz) |
| - Bluetooth 5.0 (Low Energy Level (BLE)) |
| - Gigabit Ethernet |
| - 2x USB 2.0 |
| - 2 X USB 3.0 (one occupied by data storage) |
| - 2x Micro HDMI |
| - Ambient sensor/weather station (temperature, pressure, humidity) supplied as separate data |
| - CAN-BUS 2.0B |
| - Sensor power inputs 12V, 5V |
| - Analogue output 0-10V |
| - 2 PWM outputs on the low voltage side 3A 40v |
| - Additional low voltage side output 3A 40v |
| - Two-terminal relay output 250v 16A |
| - Roll speed input of Hall sensor/encoder up to 10MHz |
| - Motor speed input for Hall sensors, VR, inductive or capacitive clamping sensors up to 15 kHz |
| - Dedicated load cell input with integrated amplifier |
| - General purpose analogue input 0-5 V |
| - 4 thermocouple inputs with possibility of analogue input |
| - Physical switch input |
| - PC-type interfaces: USB, Ethernet, micro HDMI, Wireless interfaces Wi-Fi and Bluetooth |
BRAKE CONTROLLER Version II - Parameters
| Dynamometer controller parameters 2 |
| Base 4-core 1.5 GHz PC with operating system and dedicated software and control and data acquisition system based on 32-bit RISC 64MHz control microcontroller |
| Input/Output layout |
| - Wi-Fi IEEE 802.11b/g/n/ac (2,4/5 GHz) |
| - Bluetooth 5.0 (Low Energy (BLE)) |
| - Gigabit Ethernet |
| - 2x port USB 2.0 |
| - 2x USB 3.0 port (one occupied by data storage) |
| - 2x port micro HDMI |
| - Audio mini jack |
| - Ambient conditions sensor (temperature, pressure, humidity) |
| - 2x CAN-BUS 2.0B interface |
| - Power input 24v, 12V, 5V (2A) with a total capacity of 20W |
| - 4 analogue outputs 0-10V |
| - 4 PWM open collector outputs 3A 40V |
| - 4 PWM open collector outputs 3A 28V |
| - 4 additional outputs of open collector type 3A, 40V |
| - 4 two-pin relay outputs 250V 16A |
| - 4 inputs for hall-type roller speed sensors or encoders |
| - 1 general purpose frequency input |
| - 1 speed input - Hall sensor, inductive or capacitive up to 15 kHz |
| - Dedicated input with integrated strain gauge amplifier |
| - 12 general purpose 0-5V analogue inputs |
| - 8 thermocouple inputs with possibility to work as analogue inputs |
| - 4 inputs for control buttons |
More Information
| Brand Sort Order | 0 |
|---|
Write Your Own Review